SCHOLARSHIP APPLICATION: (Deadline: APRIL 30th, 2026)
Please ensure all fields are filled in completely.To view previous winner: Click Here
(IF YOU HAVE ANY QUESTIONS, PLEASE EMAIL THE PROGRAM ADMINISTRATOR AT RYAN@STUDENTSCHOLARSHIPS.ORG)
Industrial Jibs
Industrial Jib - Lift truck jibs allow the individual operating it to reach over obstacles in an effort to place their very heavy loads on decks, roofs and raised platforms. They're usually utilized to reach through second and even third story doorways or windows to be able to pick up and move heaps to places still under construction. Fork truck jibs are actually used so as to unload trucks and flatbed trailers, to suspend trusses and laminate wood. Jibs are also usually utilized for reaching over scaffolding intended for masonry work.
Each jib boom forklift attachment consists of two rotating hooks. One hook could be manually connected to any position on the boom's bottom and the second hook is connected at the end of the jib. This allows the operator to be able to pick up any load which has two hook points. Depending upon the size of the model, every hook is rated at either 4 thousand or 6 thousand pounds It is possible to make use of either one hook or even two to lift a load. The operator has to make certain that the overall weight of the jib and the load does not go over the rated capacity of the jib as shown on the load chart for that extended or retracted position.
Jib attachments are made in order to be utilized on industrial forklifts, extendable-reach forklifts, or even on rough terrain straight-mast lift trucks. Forklift jib cranes fit onto the forklift by way of inserting two forks into the fork pockets. The rear of the jib crane then seats against the back of the fork and a safety chain wraps the forklift carriage to hold it into position.
Load Capacity for the Jib Boom Forklift Attachment
The load capacity of a lift truck jib has a most of approximately 1935 pounds to as much as 6000 pounds on either the extended or retracted positions range. You may want to consult with a material handling specialist concerning the specific limits of your lift truck application. The load capacity ratings are intended for the jib itself and not the forklift or the maximum load that could be lifted safely with a certain lift truck. It is very important remember that every time whatever attachments like a lift truck jib are connected to the lift truck, the new center of gravity made by the accessory will reduce the overall lift capacity of the forklift. There are instructions accessible that provide details on the way to correctly determine these load limits.
Fork Trucks & Fork lift Attachment Safe Usage
Before making use of a forklift jib, make certain that it is correctly secured to the lift truck with the use of shackles and hooks. Continuously be sure so as to verify that the screw pins are tight. It is very important to even be sure that the weight calculations have been done properly. Remember to take into account the truth that rated capacities sometimes decrease every time the boom is in a raised position, when the boom is extended with telehandlers or even each time the mast is tilted forward.
Several vital tips concerning the modifiable jib are: never pull a load using a forklift jib accessory, since these types of accessories are actually designed for vertical lift only. At all times pick up the load without letting it move backward and forward. Utilize extreme caution each time a load is lifted to be able to prevent tipping over the truck.
Click to Download the pdf
Forklift Parts
Lift Parts Express
TOLL FREE: 1-888-695-7994
LOCAL: 509-209-9708
1818 WEST FRANCIS AVE 198
Spokane, Washington
forkliftpartsspokane.com
Email Us
About Us